-
COMFORT
The new Honda BF5 portable engine features a host of new technologies and features that consumers will appreciate.- A new decompression mechanism helps make all three new Honda Marine engines easy to pull start, regardless of the engine temperature. The decompression mechanism opens the exhaust valve during the starting process, which makes the engines easy to start
- One-push stop switch is a segment-first, and serves to shut down the engine with no chance of the engine re-starting (no need to hold a button or switch until the engine stops completely)
- The new Honda Marine BF5 portable engines feature redesigned rubber motor mounts that reduce vibration in all rpm ranges and reduce engine noise, offering comfortable cruising
- The BF5 outboards are available with an optional charging system with a capacity of 6 Amps at 12 Volts to power consumer demands for electronic devices on board
Engine Type 4-stroke, single-cylinder Displacement (cc / cubic inches) 127 / 7.75 Bore x Stroke (mm / inches) 60 x 45 / 2.36 x 1.77 Compression Ratio 9.8 Wide Open Throttle 4500-5500 Rated Power [kW(HP) / rpm] 3.7(5)/5500 Fuel Delivery Carburetor Driven Valve System OHV Lubrication System Wet Sump Gear Ratio (13.27) 2.08:1 Gear Shift F-N-R Tilt Angle 70° Trim Angle 16° Trim Adjustment Range 4° (5HOLE) Steering Angle 45° (one side) Transom Type (inches) S(15) / L(20) Overall Length (mm / inches) 524 / 20.6 Overall Width (mm / inches) 347 / 13.66 Overall Height (mm / inches) S: 1020 / 40.16 · L: 1147 / 45.16 Transom Height (mm / inches) S: 434 / 17.09 · L: 561 / 22.09 Dry Mass (kg / lb.) S: 27.0 / 59.52 · L: 27.5 / 60.63 Starting System Recoil starter Alternator (charging) Optional 6A / 12V Ignition System Digital CDI Tilt System Mechanical Built-in Tank Capacity (L / gal.) 1.5 / .4 -
BF250D
An outboard like no other, blending the best of automotive and marine engine technologies to deliver 250HP, the BF250D is the pinnacle of Honda’s engineering and technical excellence. With the backing of the 3.6L V6 engines compact 24-valve SOHC design, the BF250D is a leader in Honda performance, reliability and durability. The sleek profile allows for easy installation, especially for multiple engine configurations. The 90amp belt-driven alternator reduces heat build up and provides superior battery charging capability.- PEACE OF MIND - World's largest engine manufacturer
- INNOVATION - Honda exclusive technology
- ENGINEERED FOR LIFE - More time on the water
- UNMATCHED PERFORMANCE - Superior power
- COVERED BY THE BEST - Unrivalled 7 Year* Domestic Warranty
-
RESPONSIVE POWER AND PERFORMANCE IN A LIGHTWEIGHT AND PORTABLE PACKAGE
The BF8 has been designed for boaters who want dependable performance in a portable package. Perfectly suited for use with sailboats, inflatables and small aluminium boats, its lightweight and compact profile make the BF8 very easy to transport. A foldaway handle positioned at the exact balance point of each engine makes it easy to carry the outboard in a level position.- Type: Four-stroke SOHC two cylinder/four valves
- Displacement: 222cc
- Bore & Stroke: 58x42mm
- Full Throttle RPM Range: 4500-5500 RPM
- Valves per Cylinder: Two
- Fuel Delivery: Carburettor
- Ignition System: PGM-IG
- Starting System: Recoil
- Cooling System: Water Cooled
- Alternator: 6 amp
DIMENSIONS
- Recommended Transom Height: 15 – 30"
- Dry Weight: 42 kg
DRIVE
- Gear Ratio: 2.33:1
- Gear Shift: F-N-R
- Propellor: Four-blade aluminium
-
ADVANCED PERFORMANCE
As with all Honda outboards, advanced four-stroke technology means unparalleled easy starting, quiet operation and low emissions. The BF8 and BF10 have very low fuel consumption and maintenance costs, yet still deliver optimum performance and durability for which Honda is renown. Programmed Ignition (PGM-IG) also accurately controls ignition timing during start-up and across the entire rev range for optimum overall operation.- Type: Four-stroke SOHC two cylinder/four valves
- Displacement: 222cc
- Bore & Stroke: 58x42mm
- Full Throttle RPM Range: 5,000-6,000 RPM
- HP Rating @ Propshaft: 10HP @ 5,800 RPM
- Valves per Cylinder: Two
- Fuel Delivery: Carburettor
- Ignition System: Electronic PGM. IG
- Starting System: Electric/Recoil
- Cooling System: Water Cooled
- Alternator: 17 amp
DIMENSIONS
- Recommended Transom Height: 15 – 20"
- Dry Weight: 42 kg
DRIVE
- Gear Ratio: 2.33:1
- Gear Shift: F-N-R
- Propellor: Four-blade aluminium
-
The Honda 40 hp outboard heralds in a new era in outboard motor technology The new Honda 40 features the innovative BLAST (Boosted low speed torque) for rapid acceleration, ECOmo lean burn control for exceptional fuel economy at cruise and NMEA 2000 which shows all engine and fuel data on a GPS screen. Lightest in class, most fuel efficient in class, best acceleration in class, the list goes on. Tick all the boxes with the new Honda 40. LONG SHAFT 20"
- Type: 3 cylinder 4stroke 6 valves
- Displacement: 808cc
- Bore & Stroke: 89 x 96
- Full Throttle RPM Range: 4500 - 5500 RPM
- HP Rating @ Propshaft: 40HP @ 5500 RPM
- Valves per Cylinder: Two
- Fuel Delivery: Programmed fuel injection
- Ignition System: Solid State
- Starting System: Electric
- Cooling System: Water Cooled
- Alternator: 22-Amp
DIMENSIONS
- Recommended Transom Height: 20”
- Dry Weight: 100kg
DRIVE
- Gear Ratio: 2.08:1
- Gear Shift: F-N-R
- Propellor: Alloy included
