Accessories

Home>Shop>Accessories
  • KEY FEATURES:
    • UNIQUE CONSTRUCTION Pressure fit molded comfort liner system provides a smooth inner chassis for maximum comfort
    • SUPPORT Adjustable waist buckle closure system
    • Level 1 back protector constructed to reduce impact energy transmission
    • Stone shield constructed with energy dispersing molded panels
    • Strategically placed ventilation ports for maximum cooling
    • Refined fit for maximum deflector coverage
    • Adjustable suspension shoulder guards with molded comfort liner
    • Back protector tested and certified according to European,Standard EN 1621-2:2014
    • Stone shield tested and certified according to the basic,requirements of Directive 89/686/EEC
    • Adjustable and removable biceps arm guards with molded comfort liner
  • WFX SKIN GTX - waterproof Ride warm when it’s cold outside! This winter city and suburban glove is mostly made of leather, along with a few fabric inserts for comfort. It’s a top seller for FIVE! Its weatherproof, breathable GORE-TEX membrane and its Thinsulate™ 180 g lining perfectly insulate hands from the rain and the cold. Its PU protective shells concealed under the leather, its TPR protective palm slider, and its leather palm are so many elements that promise real safety in case of a fall. Perforated Clarino® reinforcements on the palm and the thumb promise optimal handlebar grip. And last, but not least, this urban-style glove provides a sensation of total comfort.
    • Full-grain goatskin and weatherproof nylon fabric construction (topside) / Full-grain goatskin for suppleness (palm).
    • Weatherproof internal GORE-TEX membrane.
    • Bemberg™ internal comfort lining.
    • Thinsulate™ 180 g thermal insulation.
    • PU metacarpal-knuckle and knuckle protective shells underneath the leather.
    • TPR protective palm slider shell.
    • Perforated Clarino® palm reinforcement.
    • Closure system with elastic cuff and leather + Velcro tab.
    Sizing note: As the FIVE Glove range is based around European sizing we suggest you purchase ONE size bigger than you normally would. E.g. If you normally fit a size large then order an XL.
  • Bike Lift WITH RUBBER CURSERS - SHOW ROOM USED
  • Touring glove developed for female motorcyclists.  Lined with microfleece and 80gr hollow fiber wadding.  The waterproof/breathable and windbreaking H2Out membrane ensure rain resistance. Technical features: * Stretch outer fabric for perfect ergonomics * Clarino® palm * Neoprene inserts * Microfleece inner * Reinforcements on the little finger and side of the hand * Powertech knuckles shield * 80gr hollow fiber wadding * Waterproof, breathable and windproof H2out membrane * Product weight: 0,20 Kg
     
  • SPIDI JAB GLOVE

    $189.00 Incl GST
    The Spidi Jab RR Gloves are a great looking short glove with 0,8 mm leather combined with highly resistant stretch fabric and microfibre inserts, making them ideal for summer use. Increased air circulation thanks to special Powertech vents (variable density polyurethane shield) with the additional function of shock absorption and anti-intrusion.
  • MERLIN RANTON GLOVES

    $199.00 Incl GST
    In a short style very similar to that of custom gloves, this glove is as capable during spring/summer as it is during winter with a waxed cotton and leather outer having high levels of water repellency which combined with the Hipora membrane creates the ultimate weather barrier.  A totally unique glove to compliment the retro style brought to riders with the Merlin Heritage Collection.
    • Halley Stevensons® Waxed Cotton And Leather Mix
    • Hipora® Waterproof And Breathable Membrane
    • Reinforced Knuckle Protection With Palm Impact Protection
    • Short Cuff Fit
    • Velcro Strap Adjustment
    • Knuckle And Palm Protection
    • Soft Micro Fleece Lining

    Men’s Gloving Size Guide

    How to Measure Gloves: Measure around the palm of the hand at the fullest part, excluding the thumb

    Select options This product has multiple variants. The options may be chosen on the product page

  • 4 lt Tanklock tank bag The TankLock system for tank bags eliminates the use of straps or magnets previously used to fasten the bag to the bike. You simply install the specific ring on the tank cap, then attach the bag by alligning it to the ring and pressing lightly until you hear a "click." Equally easy is the removal of the bag, you just pull the red lever located in the base. Requires bike specific flange to mount.  
  • The Mach 1 Motorcycle Back Pack with No Drag Technology is true to its name, with a streamlined single shot molded exterior that won't deform from wind sheer. The shoulder gasket conforms perfectly to you body, increasing your aerodynamics so you aren't dragged down. Still, it has a large main compartment with interior storage -- even an organizer panel to keep it all in place through every turn. The padded interior holds up to 15 inch laptops, and it's protected by a nearly waterproof exterior. Ergonomic padded adjustable shoulder straps work with a removable no slip sternum strap, so the only thing soaring is you.
    • Streamlined single shot molded exterior is water resistant and will not deform from wind shear
    • Shoulder gasket conforms to body and increases aerodynamics
    • Removable off center hip belt won’t scratch gas tank
    • Large main compartment with multiple interior storage compartments
    • Interior organizer panel
    • Ergonomic, padded and fully adjustable riding specific shoulder straps
    • Concealed aerodynamic carry handle
    • Fully adjustable and removable no slip sternum strap
    • Interior padded laptop sleeve with elastic closure fits most 15” laptops
    • Padded iPad/tablet/e-reader sleeve
    • Hydration ready
    Dimensions:
    • 1350 Cu.In/22.1L
    • 19" H x 12.5" W x 6.5" D
    • 1lb/0.90kg
  • MERLIN CROXTON GLOVES

    $209.00 Incl GST
    • Leather and Halley Stevensons, Scottish waxed cotton outer
    • Outlast’s thermal regulating liner technology to regulate hand temperature and reduce perspiration
    • Hipora waterproof and breathable membrane
    • Long length gauntlet style
    • Wrist and cuff fastening/adjustment
    • Raised and filled knuckle protection
    Most sizes and color variations are in stock with our supplier, please enquire as too when we can get them for you.

    Men’s Gloving Size Guide

    How to Measure Gloves: Measure around the palm of the hand at the fullest part, excluding the thumb
     

    Select options This product has multiple variants. The options may be chosen on the product page

  • The TankLock system for tank bags eliminates the use of straps or magnets previously used to fasten the bag to the bike. You simply install the specific ring on the tank cap, and then attach the bag by alligning it to the ring and pressing lightly until you hear the "click." Equally easy is the removal of the bag, you just pull the red lever located in the base.  Requies specific tank flange to mount (see resource list below) Materials: 1200D Guzy nylon. PU inserts Features: 15lt - Water-resistant zips - Reflective inserts - Rain cover in fluorescent material - Weatherproof internal compartment to store the raincover - Additional protection against dampness - Removable tablet-holder - Cable port - Handle and shoulder-strap for easier transportation
  • Acerbis X-Factory Handguard The Acerbis X-Factory Handguards are designed for those looking for the ultimate in style and protection.  X-Factory are the new handguard from the Italian firm Acerbis made for those looking for the ultimate in style and protection.  Mount the X-Factory to nearly any bike with the provided universal mounting hardware. Acerbis X-Factory Handguard features:
    • Steel bar printed on its surface in different colours
    • Anticorodal armbands to fasten the hand guard to the handlebar
    • Steel expander for tighter fastening and to oppose torsion in case of impact
    • Dual-injection covers
    • Materials: Cover: 85% polypropylene, 15% rubber (TPE) | Bar: 80% steel; 20% polypropylene
    • All off-road aluminium handlebars with an internal diameter of 13.5mm to 16mm and an outside diameter of 22mm to 28mm including Fatbar and Twinwall bars.
    What's in the Box:
    • Left and Right Handguards
    • Universal Fitting Kit

    Select options This product has multiple variants. The options may be chosen on the product page

  • SPIDI STR4 GLOVES

    $239.00 Incl GST
    SPIDI STR-4 is the glove created to combine track use with the daily use on the road. Made of a mix of Hi-Fit cowhide and areas in Hi-Fit goat leather, STR-4 boasts an unparalleled ergonomics and softness. Technical features: - Hi-Fit cowhide on the back - 0.7mm thick - Hi-Fit goat leather on the palm - thickness 0.6mm - Carbon fiber knuckle protection - E.V.A reinforcements on the sides and palm - Safety strap on the wrist - Sleeve with velcro closure